Unitech user manual Mounting the RS700, Using the Hardware

Chapter 2 Using the Hardware

Mounting the RS700

The RS700 comes standard with a wall mounting kit for easy installation. Mount the RS700 to a wall through the following:

•Plastic conical anchor (4) 3x25mm.

•Self-tapping screw (4) 3.5x19mm.

1. Locate the four mounting holes on the RS700.

Mounting Holes

Mounting Holes

2.Place the RS700 on the wall. Mark the mounting hole locations with a pen.

3.Remove the RS700 and drill four 1/4-inch wide holes at least one inch deep.

4.Insert the four plastic conical anchors into the holes.

5.Secure the RS700 to the wall with the four self-tapping screws, and insert them into the plastic conical anchors.

9