Chapter 2 Using the Hardware
Performing a Hardware Reset
Perform a reset if the RS700 freezes (i.e., no longer responds).
Resetting the RS700 erases all installed records, entries and programs; returning the RS700 to default status. (Not even the date and time settings remain.) All settings return to default mode. However, data stored in the flash storage or in an SD Card Slot will remain intact. Use the remote control to access the SD folder on the RS700. See Using Remote Control on page 47.
NOTE: During the next Microsoft ActiveSync operation, lost data can be restored that was previously synchronized on the computer, or data can be restored from a storage card.
Reset the RS700 through one of the following:
1.Use a stylus to press the reset button on the RS700’s bottom panel.
2.Reconnect the power supply, and reset the Backup Battery Switch to the on position.
CAUTION! Pressing the Reset Button erases current configuration settings and reboots the RS700. The RS700 returns to default mode. All registry settings and all files (including hidden files) are returned to their origi- nal factory defaults.
10
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
