114
SETTINGS & TOOLS
Direction readings taken in any of the following location s may
result in a large margin of error.
Near buildings (especially ferro-concrete struc tures), large
metal objects (trains, motor vehicles, etc.), high-voltage power
lines, or overhead wires
Near metal objects (desks, lockers, etc.), household appliances
(TVs, computers, speakers, etc.), or permanent magnets
(magnetic necklaces, etc.)
If you suspect a reading error, move away from the above
locations and try again.
•
-
-
Walking Counter
In Pedometer mode, the number of steps you walked in a day is
measured with the pedometer to display the distance you walked a nd
the estimated amount of calories you burned.
In Virtual Trek mode, the amount of trail you traveled is displayed
based on the distance calculated from the number of steps. T he
current position on the trail, the achieved percentage, and the
milestones on the trail are displayed on the screen.
1. From idle mode, press the Center S elect Key [MENU], select
Settings & Tools, then press the Center S elect Key [OK]. Press
Tools, G’zGEAR, Walking Counte r.
2. The following keys are available in the WALKING COU NTER:
Directional Key ' left or right: Switches the mode.
Directional Key " up or down: Selects the date.
Center Select Key [WEEK/ MONTH/DAY]: Switches to display
the total number of steps walked by weeks, months or days.
(Only in Pedometer mode)
Right Soft Key [Options]: D isplays the following options:
About: Displays the description of the Walking Counter tool.
Pedometer: Switches to Pedometer mode.
Virtual Trek: Switches to Vir tual Trek mode.
•
•
•
•