145
SETTINGS & TOOLS
5. Enter the new four-digit code in the Enter New C ode field.
If you selected Calls & Services in step 4, you would als o need to
enter the current code before entering the new code.
6. Press the Directional Key down to advance to the Re- enter
New Code field.
7. Enter the new four-digit code again as confirmation.
8. Press the Center Select Key [SET].
NOTES
The default Lock Code is the last 4 digits of your phone nu mber.
There are two Lock Codes: Phone Only and Call s & Services.
•
•
Restrictions
Use the following procedure to configure Location Se tting, Calls,
Messages, and Dial-Up Modem rest rictions.
1. From idle mode, press the Center S elect Key [MENU], select
Settings & Tools, then press the Center S elect Key [OK]. Press
Phone Settings, Sec urity.
2. Enter the four-digit Lock Code, then press the Center Se lect Key
[OK]. The default Lock Code is the last 4 digit s of your mobile
telephone number.
3. Press Restrictions.
4. Enter the four-digit Lock Code, then press the Center S elect Key
[OK].
5. Select one of the following setting and then pres s the Center Select
Key [OK].
Location Setting : Unlock Setting /Lock Sett ing
Calls: Incoming Calls/Outgoing Calls
For Incoming Calls, set Allow All /Contacts Only /Block All.
For Outgoing Calls, set Allow All/Contacts Only/ Block All.
I