131
SETTINGS & TOOLS
3. Select Tone/Vibrate /Reminder, then press the Center Select Key
[OK].
Tone: Select a ringer, then press the Center Select Key [S ET]. To
play the alert tone, press the Left Soft Key [ Play].
Vibrate: Select On or Of f, then press the Center Select Key [SET].
Reminder: Select Onc e/Every 2 Minu tes/Every 15 Min utes/Off,
then press the Center Select Key [SET ].
NOTES
Emergency Tone has the following settings: Alert /Vibrate/O ff.
PTT Alert has only two set tings: Tone/Vibrate.
Keypad Volume
To set the keypad volume:
1. From idle mode, press the Center S elect Key [MENU], select
Settings & Tools, then press the Center S elect Key [OK]. Press
Sounds Settings, Keyp ad Volume.
2. Adjust the volume by pressing the Directional Key " up or down,
then press the Center Select Key [SET ] to save the setting.
Digit Dial Readout
To set whether to read out the numbers being entered when dialing a
phone number:
1. From idle mode, press the Center S elect Key [MENU], select
Settings & Tools, then press the Center S elect Key [OK]. Press
Sounds Settings, Di git Dial Readout.
2. Select On or Off, then press the Center Select Key [ SET].
Service Alerts
To set any of the three Alert options to either On or Off :
1. From idle mode, press the Center S elect Key [MENU], select
Settings & Tools, then press the Center S elect Key [OK]. Press