47
CONTACTS
6. Select the entered phone number field and press th e Right Soft
Key [Options] to select one of the foll owing options:
Set Speed Dial /Set As Default /Add 2-Sec Paus e/Add Wait
To add the Contact entry to the Speed Dial list, press Set
Speed Dial. Select the desi red Speed Dial digit by using the
keypad or by scrolling to highlight it, then press the Center Select
Key [SET]. Press the Center Select Key [ OK] to select Yes.
To set the phone number as the Default Number, press Set
As Default, then press the Center S elect Key [OK] to select Yes.
To add a pause to an existing number, press Add 2-Sec
Pause or Add Wait.
NOTE
The initial phone number entered when the new Co ntact is created
becomes the Default Number. If more than one numbe r is entered
for the Contact entry, another number can be selected as t he
Default Number.
7. After entering t he information as necessary, press the Center
Select Key [SAVE] to save.
8. CONTACT SAVED appears on the display. The phone number
reappears on screen. Press the End/Power Key to exit, or press t he
Send Key to make a call to the displayed phone number.
Adding a Phone Number to an Existing Contact
1. From idle mode, enter the phone n umber (up to 48 characters) you
want to register.
2. Press the Left Soft Key [Save], t hen press Update Existing.
3. Scroll to the existing Contact entry you want to update, the n press
the Center Select Key [OK].
•
•
•