Vidikron Model 85 manual Video 1 / S-VIDEO, Volt 750 mA Trigger Outputs, ComLink RS-232 Output

Controls and Functions

5.COMPOSITE VIDEO INPUT

Standard composite video input for connecting a VCR, laser disc player or other composite video source.

6.S-VIDEO 1 / S-VIDEO 2

Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR.

7.12-VOLT (750 mA) TRIGGER OUTPUTS

Connection for up to three (3), 12-volt trigger-controlled devices such as retractable screens or screen masks.

8. ComLink (RS-232) OUTPUT

Connect this to the ComLink (RS-232) input on the projector, using the provided communication cable.

9.IR

Wired input from a wired remote control or infrared receiver. It is a 3.5-mm, mini phono jack, wired as follows:

Ring = +5V Tip = IR Input Sleeve = Ground

When an external remote control or infrared receiver is connected to the

Note wired IR input, the IR sensor on the front of the VHD is disabled.

10.RS-232 CONTROL PORT

A female, 9-pin D-sub connector for interfacing with a PC or home theater automation/control system.

11.POWER INPUT (100 to 240 VAC)

Connect the VHD Controller to power here.

12.MAIN AC FUSE

This is the main AC input fuse (5mm x 20mm, 500 mA, 250V slow-blow).

13.MAIN POWER SWITCH

Disconnects or applies power to the VHD Controller.

10 Vidikron Vision 85 Owner’s Operating Manual