Vidikron Model 85 manual On / OFF, ENT Enter, Cursor Buttons

Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.LIGHT

Press to illuminate the buttons.

3.ON / OFF

Press to turn the projector on or off.

4.ENT (Enter)

Press to select a highlighted menu item or confirm a changed setting.

On some remote control units, this button is where the RETURN/EXIT

Note button (item #6) appears here.

5.Cursor Buttons (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = 16:9 - Standard (4:3) - Letterbox - IntelliWide - Cinema - IntelliWide 2.35 DOWN Button = IntelliWide 2.35 - Cinema - IntelliWide - Letterbox - Standard (4:3) - 16:9

IntelliWide 2.35 is available only on the Vision 85/CineWide and Vision

Note 85/CineWide with AutoScope. For more information about aspect ratios, refer to Table 4-1.

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - HDMI 1 - HDMI 2

The “direct select” function of the UP, DOWN, LEFT and RIGHT buttons is

Note available only on the analog inputs (HD/RGB, SD Component, Composite and S-Video).

6.RETURN/EXIT

Press this button to exit the current menu and return to the previous one, or to cancel an operation.

On some remote control units, the ENT (Enter) button (item #4) is in this

Note location.

7.MENU

Press this button to access the OSD controls.

12 Vidikron Vision 85 Owner’s Operating Manual