Vidikron Model 85 Mounting the Vision, Floor Mounting Upright, Adjusting the Projection, Angle

Installation

There are several methods for mounting the projector. Depending on your chosen installation, one method may be more suitable than another.

In typical front and rear screen installations, the projector can be mounted to a secure and level surface such as a table or cart. Carts are useful when moving a projector during a presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it from being moved during a presentation.

3.5

Mounting the Vision 85

Floor Mounting (Upright)

For fixed installations, and for those that want the projector out of sight or have a limited		Ceiling Mounting (Inverted)
space for projector and audience, you can invert the Vision 85 and suspend it from the ceiling
using a specially-designed ceiling mount fixture.
Note	Use only the Vidikron-approved ceiling mount kit (part number
	VIHK-000190) designed for your projector. Install the mount kit according
	to the instructions provided with it.
The projector can also be inverted and placed in an enclosure above and behind the viewing
area. Install four feet on the inside bottom surface of the enclosure on which the projector
can rest. A variety of materials can be used for this purpose (for example, rubber crutch tips
or turntable feet).
If the Vision 85 is ceiling-mounted and the screen is significantly lower than the projector,		Adjusting the Projection
you can tilt the projector at a slight angle by adjusting the ceiling mount.		Angle

If you do this, you may need to shift the image using the OSD controls, to compensate. For detailed instructions, refer to Using the On-Screen Menus on page 37.

Vidikron Vision 85 Owner’s Operating Manual 27