Vidikron Model 85 manual Press Menu to exit test pattern mode, Service

Operation

•Vidikron/ISF Logo Splash Screen Timers: When you turn on the Vision 85, it projects a welcome screen with the Vidikron logo followed by one with the ISF logo. Select Splash Timer from the Splash Configure menu to set the amount of time that these two images appear. The range is from 2 to 60 seconds, in one-second increments.

Use the up or down cursor button to select a timer value to adjust. Use the right or left cursor button to change the timer value. Press MENU when you have finished configuring both timers.

OSD Position: Select OSD Position, press ENTER and use the arrow buttons to change the size and position of the OSD controls.

Use the Service menu to access advanced projector configuration settings. This menu should be used by ISF-certified technicians only.

You must enter a passcode to access the Service menu.

Note

Test Video: Select Test Video from the Service Menu to access the internal test patterns on the Vision 85. Four patterns are available, consisting of white/gray or colored bars.

Press MENU to exit test pattern mode.

Input Names: You can give each VHD Controller input a descriptive name. For example, you may want to change the default input name to the type of source component connected to it: “VCR,” “DVD,” “Laptop” et cetera. Composite, S-Video and Component SD input names can be up to 12 characters long; the others can be up to eight characters long.

To edit an input name, select Input Names from the Service menu. Press or to select an input and press ENTER. Use the or buttons to change a character; press or to select a character to change. When you have finished editing the input name, press MENU.

To restore the default input name, press repeatedly to highlight that input name in the “Restore” column. Then, press ENTER.

To save input names so that they can be restored after a System Reset (described on page 62), press repeatedly to highlight “Save.” Then, press ENTER.

The button takes you from top to bottom in the left column, then from

Note top to bottom in the right column. To highlight “Save,” scroll through both columns.

Service

Service

Test Video

Input Names

Remote Control

Display Device

HD Format

Triggers

Miscellaneous

System Reset

Restore Saved Settings

Input Names

		Restore
Composite		Composite
S Video 1		S Video 1
S Video 2		S Video 2
Component SD		Component SD
HD/RGB 1		HD/RGB 1
HD/RGB 2		HD/RGB 2
HDMI 1		HDMI 1
HDMI 2		HDMI 2
	Save

Vidikron Vision 85 Owner’s Operating Manual 59