Basic operations
Preparing to Play a Disc or Discs
Turning on the Power
Turn on the
NOTE: Be sure that the power cord is plugged in and that the master power switch on the back of the player is switched to the ON position. If you are using a power strip or surge protector, make sure that it is plugged in and switched on.
Choosing a Disc Tray
To switch between disc trays, press the TRAY SELECT button on the player or the TRAY
Inserting a Disc
To insert a disc, press the EJECT button either on the player next to the desired disc tray or on the remote control.
NOTE: When using the remote to open the disc tray, make sure that the desired disc tray is active.
Playing a disc(s)
Make sure that the desired disc tray is active and press the PLAY button on the player or the 
button on the remote control. The disc will take a few seconds to load before playing.
Stopping and pausing a disc
To stop a disc that is playing:
Simply press the STOP button on the player or the 
button on the remote.
To pause a disc while it is playing:
Press the PLAY/PAUSE button on the player or on the remote.
Skipping and searching through tracks
Skipping Tracks
Use the PREV / NEXT buttons on the player or the << / >> buttons on the remote control to go back to a previous track, song or chapter (DVD movie) or to jump forward to the next track, song or chapter (DVD movie).
Searching Through Tracks
Use the B. SCAN / F. SCAN buttons on the player or the
<</ >> buttons on the remote to search backwards or forwards through a track. B. SCAN ( << ) scans backwards and F. SCAN ( >> ) scans forwards through a track.
Power On
Tray Select
resume
Play Disc
resume
Stop Disc
resume
Pause Disc
resume
Skip Tracks
resume
Search Tracks
20
