VocoPro DVG-909K owner manual Getting connected, Analog and Digital, DTX-9900K, Amplifier

Getting connected

AUDIO CONNECTIONS

The DVG-909K can be used as both a home entertainment DVD player and a Karaoke player/mixer. Since DVD audio is optimal with a digital connection (especially if you have an AC-3 or DTS receiver), it is common for the audio connection to be either Coaxial or Digital.

Karaoke, on the other hand, requires an analog audio connection in order to output a mixed microphone signal along with the audio source. This would mean that one would need BOTH a digital audio and analog audio connection in order to enjoy both DVD quality audio AND Karaoke entertainment. Below are instructions for connecting to both analog and digital devices.

Connecting both Analog and Digital Audio

To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs. Refer to the instructions below for each connection.

Analog and Digital

FL FR SUB Y Cb Cr VIDEO

DTX-9900K

SL SR CENTER L R COAXIAL S-VIDEO OPTICAL

Connecting to a Dolby Pro Logic Amplifier

Using six RCA patch cables, connect the plugs from one side of the cables to the FL, FR, CENTER, SL, SR and SW outputs on the DVG-909K. Connect all the plugs from the other side to the FL, FR, CENTER, SL, SR and SW inputs on your Dolby Pro Logic amplifier.

Amplifier

FL	FR	SUB	Y	Cb	Cr	VIDEO
DTX-9900K
SL	SR	CENTER	L	R	COAXIAL	S-VIDEO OPTICAL

8