Advanced operations
Repeating a Segment Using the A-B Feature
Press the
The starting point of the LOOP region is immediately commenced after pushing
To cancel the loop
Press the
NOTE: You cannot search and skip tracks while using the
Programming Playback
Press the PROG (program) button when a disc is stopped. You can select up to 20 tracks to program. The program is maintained until the STOP button is pressed twice, the disc is removed or the unit is turned off.
To program tracks
1.Press the PROG (program) button
2.Using the number pad on the remote, enter the track numbers in the order that you want them to play.
If you want to program the tracks to play in the following order:
1.Track 5
2.Track 3
3.Track 11
4.Track 1
Press the PROG button Press “5” then press ENTER Press “3” then press ENTER Press “11” then press ENTER
Press “1” then press PLAY to begin the program
To stop playback but remain in program mode press STOP once
To exit program mode, press the STOP button twice.
Repeat Segment
Program Playback
22