Troubleshooting

Problem

Possible Cause

Solution

 

 

 

The power does not come on

-The power cord many not be

- Make sure the power cord is plugged

 

loose

firmly into the back of the machine.

 

-Your power strip/surge protector may

- Make sure that it is in working condi-

 

be defective or switched OFF

tion and switched ON

 

 

 

A disc does not play or playback stops

- There may be condensation or dust in

- Use a lens cleaner to clean the disc

immediately.

the disc player.

player.

 

-The disc may be dirty or scratched

- Clean the disc or use a different one

 

 

that is not scratched.

 

 

 

No picture

- The player may not be connected

- Consult the “Getting Connected” sec-

 

correctly

tion of this manual and try reconnecting

 

 

the video connections.

 

- The television/monitor may not

- Make sure the correct video input

 

be set to the correct video input mode

mode is set on your TV or monitor.

 

 

 

 

- - Is the player in a place with excessive

- Relocate the player to a new location.

The picture is bad

vibration?

 

 

 

- Consult the “Getting Connected” sec-

 

- Are the video connections attached?

tion of this manual and try reconnecting

 

 

the video connections.

 

- Is the disc dirty?

-Ensure the disc is not dirty and

 

 

clean it if necessary.

 

- Is the DVG-909K connected directly to

- The picture may be bad when used

 

a television selector switch or a

with some television sets or projectors,

 

television with a built-in video deck?

due to the DVD copy protection scheme

 

 

- The picture quality may also suffer if

 

 

the DVD player is connected through a

 

 

selector switch with other video equip-

 

 

ment. Try turning off the power to the

 

 

other equipment

31

Page 32
Image 32
VocoPro DVG-909K owner manual Troubleshooting, Problem Possible Cause Solution