VocoPro DVG-909K owner manual RCA/S-Video KJ-7800 PRO

Getting connected cont.

VIDEO CONNECTIONS

Connecting to a TV or video mixer with an RCA Connection

When connecting to the RCA (yellow) video input on a TV or video mixer, the DVG-909K gives you the option of outputting both disc players independently (Fig.A) or together through the Switched Video Output (Fig.B).

Connecting each disc player independently (Fig. A)

Connect your RCA (yellow) video cables to the yellow RCA VIDEO outputs on each disc player (TRAY A and TRAY B). Then connect them to the RCA (yellow) video inputs on your TV or video mixer. See figure A.

NOTE: Depending on the TV or video mixer, the video input jacks may be labeled AV 1, AUX, VIDEO 1/2/3, etc.

NOTE: If your TV only has one yellow RCA video input, it is recommended that you use the DVG-909K’s switched video output.

Connecting the disc players together using the Switched Video Output (Fig. B)

Connect your RCA (yellow) video cable to the yellow RCA Switched Video Output on the rear panel of the DVG-909K. Then connect the other end of your RCA cable to the video input on your TV or video mixer. See Figure B.

NOTE: When using the Switched Output, the DVG-909K will automatically switch the audio output to the active disc player A or B.

RCA/S-Video

B

KJ-7800 PRO

VIDEO

MIXER

LTV-5

(Fig. A)

LTV-5

(Fig. B)

10