Wall mounting (optional)
The wall mount brackets are designed for use on standard wall mount plates only..
1.Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit.. Then plug the adaptor into an electrical outlet.
2.Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to the wall jack..
3.Line up the tabs on the wall mount adaptors with the holes at the bottom of the base unit/back of the charger. Snap the wall mount bracket firmly in place.
4.Mount the base unit on the wall. Position the base unit so that the mounting studs will fit into the holes on the wall mount bracket.. Slide base unit down on the mounting studs until it locks into place..
Getting started
www.vtechphones.com
