![](/images/new-backgrounds/1289660/28966011x1.webp)
Installation
Choose a location
For maximum performance of your cordless telephone system:
1.Choose a central location for your base unit..
2..Install your base unit and extension handset away from electronic equipment such as personal computers, television sets and microwave ovens..
3..In locations where there are multiple cordless telephones, separate base units as far as possible from each other..
4..Install your telephone equipment away from heat sources and direct sunlight..
5.Avoid excessive moisture, dust or extreme cold..
1..
2..
Install handset battery
1.Align the two holes in the plug with the socket pins, then snap the plug into place..
2.Place the battery in the compartment with the wires in the upper right corner..
3.Replace cover by sliding it upwards until it clicks into place..
4.Be sure to charge the battery for 16 hours before using your phone..
1 | 3 |
•Use only the provided VTech battery, or equivalent..
•Place the handset in its base or charger when not in use to ensure optimum performance..
•CAUTION: To reduce the risk of fire or injury, read and follow these instructions:
1..Use only the battery supplied, or equivalent..
2..Do not open or
mutilate the battery.. Released electrolyte is corrosive and may cause damage to the eyes or skin It may be toxic if swallowed..
3..Exercise care in handling battery in order not to short the battery with conducting materials such as rings, bracelets, and keys.. The battery
or conductor may overheat and cause burns..
Getting started
www.vtechphones.com