www.vtechphones.com 19
Basic operation
Handset operation
Making calls
• Press (or SPEAKER to u se the handset speakerp hone feature),
then dial the phone number.
-OR-
Dial the phone number rst, t hen press (or SPEAKER).
• To end your call, press OFF or place the handset in the base or charger.
Answering calls
• Press , SPEAKER or any dialing keys.
• To end your call, press OFF or place the handset in its telephone base or
charger.
Flash function
You can use your phone with service s such as call waiting.
When you subscribe to call waiting service from your telephone company,
press /FLASH to switch to the new call when you receive a call waiting
signal. Press /FL ASH again to switch back to the orig inal call.
Handset volume
The volume control is on the right side of the handset. During a call, press
the VOL or keys to adjust the listening volume to a comfortable level.
When you reach the maximum or minimum setting, a double beep will
sound. (Follow these instructions to change the volume for the hands et,
speakerphone or headset.)
Redial
• When the handset is idle, press REDIAL/PAUSE to display the last ve
telephone numbers dialed from the handse t (up to 32 digits for e ach
number). Use or to scro ll through the la st ve numbers d ialed.
When the beginning or the end of the red ial list is reached, a double
beep will sound.
• T he procedure
to change
the volume is
the same for
the handset
earpiece,
speakerphone
and headset.
800-595-9511
REDIAL