BATTERY INSTALLATION

1. Make sure the unit is OFF.

2. Open the battery cover on the bottom of the unit.

3. Insert 4 new “AA” batteries (UM-3 / LR6) as illustrated.

DO NOT USE RECHARGEABLE BATTERIES in this

unit.

4. Close the battery cover.

NOTE: Remove all pre-installed batteries and the use of new, alkaline batteries is recommended for maximum performance.

STANDARD FOR BATTERY TOYS

Non-rechargeable batteries are not to be recharged;

Rechargeable batteries are to be removed from the toy before being charged;

Rechargeable batteries are only to be charged under adult supervision;

Different types of batteries or new and used batteries are not to be mixed;

Only batteries of the same or equivalent type as recommended are to be used;

Batteries are to be inserted with the correct polarity;

Exhausted batteries are to be removed from the toy;

The supply terminals are not to be short-circuited;

The toy is not to be connected to more than recommended number of power supplies.

NOTE: If the unit suddenly stops working or the sound becomes weak, turn the unit OFF for 15 seconds, then turn it back ON. If the problem persists it may be caused by weak batteries. Please install a new set of batteries and try the unit again.

3

Page 10
Image 10
VTech XL Series user manual Battery Installation, Standard for Battery Toys, Do not USE Rechargeable Batteries in this