Vulcan-Hart VCE6H ML-126177 manual Recalling a Program from Memory

To COPY an existing program to a NEW program number —

Recall and display the program number that you wish to copy.

Press	to begin the program. Pause. Press	to stop the program.
Change the program number to the NEW number.
Press	until the beep sounds, indicating the program has been
copied.

To CHANGE a program —

With — — in the program number display, the control is in Manual mode.

0 0

Press the key. Program number 00 is displayed. Use the UP or

—— DOWN arrows to increase or decrease until the program number you want to change is displayed.

Step through each phase, making any temperature, time or other changes

for the phase; press to shift to the next phase. The program number begins to blink when one or more changes have been made to the program.

To SAVE the changed cooking program, press	and hold it in for about
three seconds until the beep sounds.

RECALLING A PROGRAM FROM MEMORY

Once a menu item has been programmed, it can be recalled, reviewed and used to cook food.

If the Program has already been programmed, its values are recalled from memory and displayed. You can view all the programmed information by stepping through the phases using the phase button.

To RECALL a program from memory —
	With — — in the program number display, the control is in Manual mode.
0 0	Press the	key. Program Number 00 is displayed. Use the UP or
	DOWN arrows to select the program number you want.
— —	Use the Phase 1 – 5 key to step-through and verify the cooking parameters
	for each phase of the cooking program.
	Load the oven. If using the probe, place it in the center of the product.
	Close the door and press		to begin the cooking program. The
	blinking indicator light in the Phase 1 – 5 key shows which phase of the
	cooking program is being performed. If the program is timed, the display
	shows the total time remaining. When the cooking program is done, the
	buzzer will sound.
	Press	to silence the buzzer. Check the product for doneness.

– 15 –