BAKING (Convection Baking – HOT AIR)
Convection Baking involves baking, browning, roasting, etc. without adding steam or moisture to the process. Hot air is
Automatic Convection Baking can be set up so the buzzer sounds when the Cooking Time has elapsed or when the product's internal temperature has reached the Probe Temperature set point. If using the Probe Temperature, insert the probe near the center of the product. Cooking Time is not used when the Probe Temperature is in use.
If using the Probe Temperature, either the Oven Temperature or can be used to control the oven during baking. If using the Oven Temperature setting, the oven temperature will remain constant
throughout the convection baking operation or phase. If using the Probe Temperature, | can be set | ||
to keep the oven temperature | degrees warmer than the Probe. With | cooking, the oven |
temperature gradually increases at the same rate as the internal temperature of the product, always
maintaining a constant difference. The result with | is slow baking or roasting with less brown |
crusting on the outside of the product. |
|
Turn the oven ON.
Select Convection (HOT AIR) Mode; and set the Vent Closed or Open.
For standard automatic baking, set the Cooking Time and Oven Temp.
• To set the Cooking Time, press | and use the UP and DOWN |
arrows to adjust the setting. |
|
| • To set the Oven Temperature, press | and use the UP and DOWN |
3 5 0•F | arrows. |
|
For final product temperature baking, set the Probe Temperature.
•To set the Probe Temperature, press and use the UP and DOWN
arrows. When the Probe Temperature indicator is lit, the numeric value in the time display is the Probe Temperature in °F. Probe
Temperature can be used with either or .
For slow baking or roasting, use with the final Probe Temperature.
•To set , press and use the UP and DOWN arrows.
When the control is set, load the oven. If using the probe, place it in the
center of the product. Close the door and press to begin.
Upon completion of the baking process, when either the Cooking Time has counted down or the Probe Temperature has been reached, the buzzer will sound.
Press to silence the buzzer. Check the product for doneness.
– 16 –