Wacom DTU-1931 user manual Rear View, Pen storage compartment, Kensington security slot, Stand

DTU193_Manual.fm Page 9 Monday, September 15, 2008 2:42 PM

REAR VIEW

Pen storage compartment

To store, insert one end of the pen into either side of the compartment. Then gently press the other end of the pen into the compartment.

To remove, press in on either end of the pen. This will pop the opposite end out of the compartment so you can remove the pen.

Kensington security slot

Allows easy attachment of a security cable.

Stand adjustment lever

DVI/VGA (digital/analog) switch

Set this switch for the video connection you will be using.

Video, USB, and power connectors

Pen tether attachment point

If using a pen tether, connect it to the attachment point located on the left or right side of the unit.

Stand

Adjusts the tilt angle of the unit. See Adjusting display incline on page 10.

IMPORTANT: Always store the pen display on a stable surface or in its original packing carton when not in use. Be sure to adjust the stand to the low tilt position before packaging the DTU-1931. If you do not close the stand, the notched mechanism may be damaged during transportation and storage.

Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving the DTU-1931, always do so by grasping the main body casing.

Your new DTU-1931

Page 9