Wacom DTU-1931 user manual PEN Display Components, Front View

DTU193_Manual.fm Page 8 Monday, September 15, 2008 2:42 PM

PEN DISPLAY COMPONENTS

Familiarize yourself with the many features and components of your product.

FRONT VIEW

On Screen Display (OSD) controls

These controls enable you to adjust a variety of display settings. See Adjusting the display on page 24.

Status LED

Lights blue when the pen is in the active area of the pen display tablet and the pen tip is pressed. The USB cable must also be plugged into an active USB port before the LED will light.

Power switch

Turns power to the unit on or off.

Power LED

Lights blue when power has been supplied to the DTU-1931 and a video signal is present.

Glows orange when no video signal is detected by the DTU-1931. (e.g., Your computer is turned off, starting up, or has entered a power management mode in which video signals are not sent.)

Use the integrated USB ports (one located on each side of the unit) to connect a USB device (e.g., a USB Flash Drive or a USB remote controller).

Be sure to fully install the DTU-1931 hardware and software before connecting any other devices to the unit.

Your new DTU-1931

Page 8