Wayne-Dalton 9300 Tools Required, Removing An Existing Door, 1/8”, 3/16” DRILL BITS, Gloves

Tools Required

POWER DRILL	RATCHET WRENCH	PLIERS/WIRE CUTTERS	TAPE MEASURE	1/8”, 3/16” DRILL BITS
				INSTALLATIONPRE-
PHILLIPS HEAD SCREWDRIVER	FLAT TIP SCREWDRIVER	PENCIL	NEEDLE NOSE PLIERS	GLOVES
7/16”, 1/2”, 9/16”	7/16” SOCKET DRIVER	3/8”, 7/16”, 1/2”, 9/16”	SAFETY GLASSES
SOCKETS		WRENCHES
HAMMER	VICE GRIPS	VICE CLAMPS	SAW HORSES (PAIR)	STEP LADDER

Removing An Existing Door

IMPORTANT: COUNTERBALANCE SPRING TENSION MUST ALWAYS BE RELEASED BEFORE ANY ATTEMPT IS MADE TO START REMOVING AN EXISTING DOOR.

WARNING

A POWERFUL SPRING RELEASING ITS ENERGY SUDDENLY CAN CAUSE SEVERE OR FATAL INJURY. TO AVOID INJURY HAVE A TRAINED DOOR SYSTEMS TECHNICIAN, USING PROPER TOOLS AND INSTRUCTIONS, RELEASE THE SPRING TENSION.

For detailed information see supplemental instructions “Removing an Existing Door /Preparing the Opening”. These instructions are available at no charge from Wayne-Dalton Corp., P.O. Box 67, Mt. Hope, OH 44660, or at www.wayne-dalton.com.

5

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com