Wayne-Dalton 9300 installation instructions Operator Stile, Side View, Lock Stile, Astragal

Door Section Identification

All hinges are factory attached at the top of each section (except the top section). See illustrations to the right.

NOTE: The side view illustration shows the roller carrier profile at the top of each section, and can be used in conjunction with identifying each section.

The BOTTOM SECTION can be identified by the bottom astragal and bottom bracket warning labels.

The LOCK SECTION can be identified by the lock stile /or side view.

The INTERMEDIATE I SECTION can be identified by the warning label on either the right or left hand side of the section /or side view.

The INTERMEDIATE II SECTION can be identified by the side view (Used ONLY with 5 section doors).

The TOP SECTION can be identified by no pre- installed end or center hinges, and a factory attached operator stile.

OPERATOR STILE

SIDE VIEW TOP SECTION

1 7/8”

SIDE VIEW INTERMEDIATE II SECTION (8”-5 SECTION DOOR ONLY)

2”	WARNING LABEL
SIDE VIEW	INTERMEDIATE I SECTION
1 7/8”	LOCK STILE
SIDE VIEW	LOCK SECTION
	BOTTOM BRACKET
	WARNING LABELS
	BOTTOM SECTION
	ASTRAGAL

4

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com