Invalid Access Lockout Feature | Western Telematic APS-16M, APS-8M

Conﬁguration

5.5.4.The Invalid Access Lockout Feature

When properly conﬁgured and enabled, the Invalid Access Lockout feature will watch all login attempts made at a given port. If the port exceeds the selected number of invalid attempts, then that port will be automatically disabled for a user-deﬁned length of time.

Note that when an Invalid Access Lockout occurs, you can either wait for the Lockout Duration period to elapse, or issue the /UL command to instantly unlock all ports.

Note: The Invalid Access Lockout feature can be individually enabled/disabled at each port.

The Invalid Access Lockout Feature is conﬁgured and enabled using the Port Parameters Menu for the desired port. When "Invalid Access Lockout" is selected, the APS-8/16M will display a submenu which allows you to conﬁgure the following parameters:

1.Lockout Access: Enables/Disables Invalid Access Lockout at this port.

2.Lockout Attempts: The number of invalid access attempts required to trigger the Invalid Access Lockout feature.

3.Lockout Duration: The length of time that ports will remained locked when an Invalid Access Lockout occurs. Note that if the duration is set to "0", the port will remained locked until the /UL command is issued.

5-17

Image 33

Western Telematic APS-16M, APS-8M manual Invalid Access Lockout Feature

Contents

Models Covered User’s GuidePage Secure Racking Input SupplyGrounding Shock Hazard Do Not Enter Disconnect Power Table of Contents List of Figures Introduction Modem Communication Configuration BackupAPS-8M and APS-16M Units Typographic Conventions Front Panel Unit Description Back Panel  Power Switch Hardware Installation Getting StartedConnect your Equipment to the Serial Ports Communicating with the APS-8/16M Access Command Mode Port Status Screen Model APS-8M Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Connecting Power to the APS Unit Hardware InstallationAC Powered Units DC Powered Units Connect a Telco Line to the Modem Port Connecting Devices to the APS Serial Ports Access to the APS-8/16M Command Mode Configuration Password Functions System SetUp Ports System Parameters Menu System Parameters Menu /F Edit Password Directory Password Directory Adding Passwords Editing and Deleting Passwords Dial Back Function Deleting the Entire Password Directory Add Name/Password Menu Dial Back ExampleSystem Parameters Menu Configuration Conventions Port Configuration Port Modes RTS/CTS 3. RS232 Port Configuration Menus Conﬁguration Port Parameters Menu Modem Mode Port 3 Shown Conﬁguration APS-8M / APS-16M Asynchronous Port Switches User’s Guide Invalid Access Lockout Feature Copy Port Parameters Copying Parameters to All Ports Save User Selected Parameters APS-8M / APS-16M Asynchronous Port Switches User’s Guide Communicating with the Internal Modem Internal Modem Common AT Commands Command Function/OptionsDial String Modiﬁers Data Terminal Ready DTR Control Command Function/Options Port Status Screen /S Status Screens Port Diagnostics Screen /SD Port Diagnostics Screen Model APS-8M Defaults Shown Port Parameters Screens /W Password Directory Screen /V Password Directory Screen Sample Values Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Any-to-Any Mode OperationPort Connection and Disconnection Enter Disconnecting Ports Three Characters Uses the format EnterLLLEnter, where Server Enter Defining Hunt Groups Hunt Group Example Buffer Mode Passive Mode Xx Enter Reading Data from Buffer Mode Ports Port Buffers Modem Mode Operation APS-8M / APS-16M Asynchronous Port Switches User’s Guide Sending Parameters to a File Saving and Restoring Configuration Parameters Restoring Saved Parameters 10-1 Upgrading APS-8/16M Firmware 10-2 Command Reference Guide Command Conventions11-1 11-2 Command Response 11-3 Command Summary Format Response Command SetTerse 11-4 Format /C x x Enter Format /CP Enter11-5 2 Enter or /D/Y 3 Enter Format /D/Y x x EnterFormat /E/Y x x Enter 11-6 Format /H Enter Format /F EnterFormat /I/Y Enter 11-7 Format /S Enter Format /P x EnterFormat /SD Enter 11-8 Format /UF Enter Format /U EnterFormat /UL Enter Format /V Enter Format /W x Enter Format /X Enter11-10 Apx-1 RS232 Port Interface Power SpecificationsRS232 Port Interface Stop Bits 1 or Apx-3 Customer Service Trademark and Copyright Information Trademarks Used in this ManualApx-4 Apx-5 Regulatory Statements Apx-6 EMC, Safety, and R&TTE Directive Compliance Index-1 Index Index-2 Index Index-3 Index-4 Page Sterling Irvine California 949 586-9950 Toll Free