Format /U Enter, Format /UF Enter, 11-9 | Western Telematic APS-16M

Command Reference Guide

/U	Save Parameters

Sends conﬁguration parameters to an ASCII text ﬁle as described in Section 9. Availability: Supervisor Mode Only

Format: /U [Enter]

Response: The APS-8/16M will send a series of command lines.

/UF Upgrade Firmware

When new versions of the APS-8/16M operating ﬁrmware become available, this command is used to update the existing ﬁrmware as described in Section 10. Note that this command will only function at the Internal Modem Port and at Setup Ports One and Two.

Availability: Supervisor Mode Only

Format: /UF [Enter]

Response: The APS-8/16M will display a menu which offers the options to retain existing APS-8/16M parameters, default parameters or abort the upgrade procedure.

/UL Unlock All Ports

Unlocks all ports that have been deactivated by the Invalid Access Lockout Function. When the /UL command is invoked, the APS-8/16M will unlock all RS232 ports that are currently in the locked state. For more information on the Invalid Access Lockout Function, please refer to Section 5.5.4.

Availability: Supervisor Mode Only.

Format: /UL [Enter]

Response: The APS-8/16M will unlock all RS232 Ports.

/V	Display Password Directory

Displays the Password Directory as described in Section 7.4. Note that the /V command will not display actual passwords, but will instead read "deﬁned" or "undeﬁned."

Availability: Supervisor Mode Only.

Format: /V [Enter]

Response: The unit will display the Password Directory Screen.

11-9

Image 69

Western Telematic APS-16M, APS-8M manual Format /U Enter, Format /UF Enter, Format /UL Enter, Format /V Enter, 11-9

Contents

Models Covered User’s GuidePage Secure Racking Input SupplyGrounding Shock Hazard Do Not Enter Disconnect Power Table of Contents List of Figures Introduction Modem Communication Configuration BackupAPS-8M and APS-16M Units Typographic Conventions Front Panel Unit Description Back Panel  Power Switch Hardware Installation Getting StartedConnect your Equipment to the Serial Ports Communicating with the APS-8/16M Access Command Mode Port Status Screen Model APS-8M Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Connecting Power to the APS Unit Hardware InstallationAC Powered Units DC Powered Units Connect a Telco Line to the Modem Port Connecting Devices to the APS Serial Ports Access to the APS-8/16M Command Mode Configuration Password Functions System SetUp Ports System Parameters Menu System Parameters Menu /F Edit Password Directory Password Directory Adding Passwords Editing and Deleting Passwords Dial Back Function Deleting the Entire Password Directory Add Name/Password Menu Dial Back ExampleSystem Parameters Menu Configuration Conventions Port Configuration Port Modes RTS/CTS 3. RS232 Port Configuration Menus Conﬁguration Port Parameters Menu Modem Mode Port 3 Shown Conﬁguration APS-8M / APS-16M Asynchronous Port Switches User’s Guide Invalid Access Lockout Feature Copy Port Parameters Copying Parameters to All Ports Save User Selected Parameters APS-8M / APS-16M Asynchronous Port Switches User’s Guide Communicating with the Internal Modem Internal Modem Common AT Commands Command Function/OptionsDial String Modiﬁers Data Terminal Ready DTR Control Command Function/Options Port Status Screen /S Status Screens Port Diagnostics Screen /SD Port Diagnostics Screen Model APS-8M Defaults Shown Port Parameters Screens /W Password Directory Screen /V Password Directory Screen Sample Values Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Any-to-Any Mode OperationPort Connection and Disconnection Enter Disconnecting Ports Three Characters Uses the format EnterLLLEnter, where Server Enter Defining Hunt Groups Hunt Group Example Buffer Mode Passive Mode Xx Enter Reading Data from Buffer Mode Ports Port Buffers Modem Mode Operation APS-8M / APS-16M Asynchronous Port Switches User’s Guide Sending Parameters to a File Saving and Restoring Configuration Parameters Restoring Saved Parameters 10-1 Upgrading APS-8/16M Firmware 10-2 Command Reference Guide Command Conventions11-1 11-2 Command Response 11-3 Command Summary Format Response Command SetTerse 11-4 Format /C x x Enter Format /CP Enter11-5 2 Enter or /D/Y 3 Enter Format /D/Y x x EnterFormat /E/Y x x Enter 11-6 Format /H Enter Format /F EnterFormat /I/Y Enter 11-7 Format /S Enter Format /P x EnterFormat /SD Enter 11-8 Format /UF Enter Format /U EnterFormat /UL Enter Format /V Enter Format /W x Enter Format /X Enter11-10 Apx-1 RS232 Port Interface Power SpecificationsRS232 Port Interface Stop Bits 1 or Apx-3 Customer Service Trademark and Copyright Information Trademarks Used in this ManualApx-4 Apx-5 Regulatory Statements Apx-6 EMC, Safety, and R&TTE Directive Compliance Index-1 Index Index-2 Index Index-3 Index-4 Page Sterling Irvine California 949 586-9950 Toll Free