Western Telematic MPC-20VS20-1, MPC-20VD20-2, MPC-20VD20-1, MPC-20VS20-2 MPC-H Series - Back Panel

Unit Description

1	3					4				3
	BUS	A-1	A-2	A-3	A-4	A-5	A-6	A-7	A-8	BUS
	A									A
											ACT LINK
										ALARM
										A
										B
	BUS	B-1	B-2	B-3	B-4	B-5	B-6	B-7	B-8	BUS
	B									B	10/100 BaseT
2	6					5			6	7	8

Figure 2.2: MPC-H Series - Back Panel (Model MPC-16H-1 Shown)

2.2. MPC-H Series - Back Panel

As shown in Figure 2.2, the MPC-H Series Back Panel includes the following components:

1.Power Circuit A - Power Inlet: An IEC320-C20 AC inlet which supplies power to MPC control functions and the Circuit “A” outlets. Also includes cable keeper (not shown.)

Note: MPC-18H series units feature a single Power Inlet.

2.Power Circuit B - Power Inlet: An IEC320-C20 AC inlet which supplies power to MPC control functions and the Circuit “B” outlets. Also includes cable keeper (not shown.) (Not present on MPC-18H series units.)

3.Power Circuit A - Circuit Breaker(s): Note that on MPC-16H and MPC-18H models, there are two circuit breakers for each power circuit. The circuit breakers are rated as follows:

•MPC-8H-1, MPC-16H-1 and MPC-18H-1: 20 Amp Circuit Breaker(s).

•MPC-8H-2, MPC-16H-2 and MPC-18H-2: 16 Amp Circuit Breaker(s).

4.Power Circuit A - Switched Outlets: AC Outlets that can be switched On, Off or rebooted in response to user commands:

•MPC-8H-1:Four (4) each, NEMA 5-20R Outlets.

•MPC-8H-2:Four (4) each, IEC320-C13 Outlets.

•MPC-16H-1:Eight (8) each, NEMA 5-20R Outlets.

•MPC-16H-2:Eight (8) each, IEC320-C13 Outlets.

•MPC-18H-1:Eight (8) each, NEMA 5-20R Outlets.

•MPC-18H-2:Eight (8) each, IEC320-C13 Outlets.

2-3