Western Telematic MPC-20VS20-1 Switch Plugs On, ON A1 Enter or /ON ROUTER Enter, ON AUX1 A1 Enter

Operation

When switching and reboot commands are executed, the MPC will display a "Sure?" prompt, wait for user response, and then complete the command. The unit will pause for a moment while the command is executed, and then return to the Plug Status Screen. To Switch Plugs, or initiate a Reboot Cycle, proceed as follows:

1.Switch Plug(s) On:

a)Local MPC Units or Individual MPC Units: To power-on a plug or Plug Group, type /ON n and press [Enter]. Where "n" is the alphanumeric number or name of the desired plug or Plug Group. For example:

/ON A1 [Enter] or /ON ROUTER [Enter]

b)AUX/Remote MPC Units: If your local MPC unit is connected to one or more optional AUX/Remote MPC units, type /ON aux n and press [Enter]. Where "aux" is the AUX/Remote unit and "n" is the alphanumeric number or name of the desired plug. For Example, to switch On Plug A1 on the AUX1 unit, enter the following:

/ON AUX1 A1 [Enter]

Note: Enter a space to separate the AUX parameter from the Plug number.

2.Switch Plug(s) Off:

a)Local MPC Units or Individual MPC Units: To power-off a plug or Plug Group, type /OFF n and press [Enter]. Where "n" is the alphanumeric number or name of the desired plug or Plug Group. Note that the “/OFF” command can also be entered as “/OF”. For example:

/OFF B2 [Enter] or /OF ROUTER [Enter]

b)AUX/Remote MPC Units: If your local MPC unit is connected to one or more optional AUX/Remote MPC units, type /OFF aux n and press [Enter]. Where "aux" is the AUX/Remote unit and "n" is the alphanumeric number or name

of the desired plug. Note that the “/OFF” command can also be entered as

“/OF”. For Example, to switch Off Plug A2 on the AUX3 unit, enter either of the following command lines:

/OFF AUX3 A2 [Enter] or /OF AUX3 A2 [Enter]

Note: Enter a space to separate the AUX parameter from the Plug number.

9-6