Western Telematic MPC-20VS20-2, MPC-20VD20-2, MPC-20VD20-1 Web Browser Interface, Text Interface

Basic Configuration

5.5.2.1. Granting User Account Access to Plugs on AUX Units

Web Browser Interface

To grant a user account access to plugs on AUX units, simply select the desired plugs from the "Configure Plug Access" drop down menu as you normally would and then click on the "Add User" button.

Text Interface

When Plug Access for each user account is defined via the Text Interface, the following procedure is used to grant access to plugs on optional AUX/Remote units:

1.From the Add User menu, type 4 and press [Enter] to display the Plug Access menu. At the Plug Access menu, select plugs for your local MPC unit as you normally would, and when finished, press [Enter] to return to the Add User menu.

2.To grant access to plugs on AUX units, type 4 and press [Enter] again to return to the Plug Access menu, and then type > (greater than symbol) and press [Enter] to scroll to the desired AUX MPC unit. When the desired AUX unit is displayed, select plugs for the AUX unit as you normally would, and then press [Enter] to return to the Add User Menu.

Note: The first line of the Plug Access menu will indicate the name of the AUX or Local MPC unit that is currently selected.

3.Repeat Step 2 above to grant access to plugs on additional AUX units.

4.When you have finished granting Plug Access rights to this user, define any other desired parameters for this account, and then make certain to press [Esc] several times until the "Saving Configuration" message is displayed and the unit returns to the MPC command prompt.

5-27