Manuals / Western Telematic / Lawn and Garden / Yard Vacuum

Western Telematic MPC-20VS20-1, MPC-20VD20-2, MPC-20VD20-1, MPC-20VS20-2 manual Default = undefined

Models: MPC-20VS20-1 MPC-8H-1 MPC-20VS16-3 MPC-20VD16-3 MPC-20V-1 MPC-8H-2 MPC-20VS20-2 MPC-20VD20-1 MPC-20VD20-2

1 204

Download 204 pages 27.87 Kb

Page 119

Manual background

Alarm Configuration

The Load Shedding configuration menus for both the Over Temperature (Initial Threshold) alarm and the Over Temperature (Critical Threshold) alarm offer the following parameters:

•Enable: Enables/Disables Load Shedding for the corresponding alarm. When enabled, the MPC will switch the user specified plugs whenever the temperature exceeds the Alarm Set Threshold value. (Default = Disable.)

•Plug State: Determines whether the selected plugs/plug groups will be switched On or Off when Load Shedding is enabled and the temperature exceeds the user- defined Alarm Set Threshold. For example, if the Plug State is set to "Off", then the selected plugs/plug groups will be switched Off when the Alarm Set Threshold is exceeded. (Default = Off.)

•Auto Recovery: Enables/Disables the Auto Recovery feature. When both Load Shedding and Auto Recovery are enabled, the MPC will return plugs to their former On/Off state after the temperature falls below the Alarm Clear Threshold value. This allows the MPC to "undo" the effects of the Load Shedding feature after the temperature has returned to an acceptable level. (Default = Off.)

•Plug Access: Determines which Plug(s) will be switched when the temperature exceeds the Alarm Set Threshold and the Load Shedding feature is triggered. For example, if plugs A1, A2 and A3 are selected, then these plugs will be switched On or Off whenever the temperature exceeds the Alarm Set Threshold.

(Default = undefined.)

Notes:

•In the Text Interface, Plug Access is configured by typing 4, pressing [Enter] and then selecting the desired Plug(s) from the resulting submenu.

•In the Web Browser Interface, Plug Access is configured by clicking on the "plus" symbol in the "Configure Plug Access" field to display the drop down menu, and then selecting the desired Plug(s) from the drop down menu.

•If your installation includes optional AUX units, please refer to Section 7.2.1.1 for additional instructions regarding granting user account access to plugs on AUX units.

7-10

Image 119

Western Telematic MPC-20VS20-1, MPC-20VD20-2, MPC-20VD20-1, MPC-20VS20-2, MPC-20V-1 MPC-8H-2, MPC-20VD16-3 Default = undefined

Contents

MPC Series Firmware Version 1.50 and HigherModels Covered Managed Power ControllersWarnings and Cautions Installation InstructionsNo Serviceable Parts Inside Authorized Service Personnel Only Shock Hazard - Do Not Enter Lithium BatteryDetached 15-Amp “Starter” Cables Disconnect PowerTwo Power Supply Cables Units with Attached Power Supply CablesIndustry Canada - EMI Information EMC, Safety, and R&TTE Directive ComplianceAgency Approvals FCC Part 15 RegulationTable of Contents 6. Reboot Options Table of Contents5. Basic Configuration continued 9. Operation 13. Operation via SNMP continued List of Figures 1. Introduction Power Metering and ManagementSecurity and Co-Location Features Introduction Convenient, Durable DesignModel Numbers Bold Font Typographic ConventionsCOURIER FONT Managed Power 2. Unit Description2.1. MPC-H Series - Front Panel 6 7 8Unit Description MPC-8H-2, MPC-16H-2 and MPC-18H-2: 16 Amp Circuit Breakers 2.2. MPC-H Series - Back PanelMPC-8H-1, MPC-16H-1 and MPC-18H-1: 20 Amp Circuit Breakers 2.3. MPC-V Series - Hardware Description BRANCH Managed Power Controller MPC-20V8.8.8 BRANCHSome MPC models include only one power circuit 2.4. Additional Button Functions 1. Reboot Operating System2. Set Parameters to Factory Defaults 3. Toggle/Default All Plugs4. Enable/Disable Audible Alarm 3. Getting Started 3.1. Installing the MPC Hardware3.1.1. Apply Power to the MPC MPC-H Series model numbers that end with the “-1” suffix include 20 Amp Circuit Breakers 3.1.2. Connect your PC to the MPC 3.2. Communicating with the MPCii. Text Interface: Type /OFF A1 and press Enter a Reboot Outletii. Text Interface: Type /BOOT A1 and press Enter b Switch Outlet Off b Text Interface: Type /X and press Enter 3.3. Installing and Operating the Optional MPC-DISPLAY Hardwarec Switch Outlet On ii. Text Interface: Type /ON A1 and press Enter4.1.1. Installing the Power Supply Cable Keepers 4. Hardware Installation4.1. Connecting the Power Supply Cables Hardware Installation CAUTIONS 4.2. Connection to Switched Outlets4.1.2. Connect the MPC to Your Power Supply 4.3. Serial Console Port Connection 4.4. Connecting the Network Cable4.3.1. Connecting a Local PC 4.3.2. Connecting an External Modem4.5. Connecting Remote MPC Units to the AUX Ports Hardware Installation 4.6. Connecting the Optional MPC-DISPLAY Unit4.7. Rack Mounting 5.1.1. The Text Interface 5. Basic Configuration5.1. Communicating with the MPC Unit To access command mode via the Text Interface, proceed as follows 5.1.2. The Web Browser Interface 5.1.3. Access Via PDA 5.2. Configuration Menus Figure 5.4: The System Parameters Menu Web Browser Interface Basic ConfigurationFigure 5.3: The System Parameters Menu Text Interface 5.3. Defining System Parameters Page 5.3.1. The Real Time Clock and Calendar 5-10 5.3.2. The Invalid Access Lockout Feature The Invalid Access menus allow you to select the following 5.3.3. Automated Mode 5-14 5.3.4. Log Configuration5.3.4.1. The Audit Log and Alarm Log 5.3.4.3. Reading and Erasing Logs 5.3.5. Callback Security 5-18 5.4. User Accounts 5.4.1. Command Access Levels5.4.2. Plug Access 5.4.3. Port Access 5.5.1. Viewing User Accounts 5.5. Managing User AccountsFigure 5.6: The Add User Menu Web Browser Interface Basic ConfigurationFigure 5.5: The Add User Menu Text Interface 5.5.2. Adding User Accounts 5-25 Web = On Text Interface Web Browser Interface5-28 5.5.3. Modifying User Accounts5.5.4. Deleting User Accounts Deleted accounts cannot be automatically restored5.6. The Plug Group Directory 5.6.1. Viewing Plug Groups Figure 5.8: The Add Plug Groups Menu Web Browser Interface Basic ConfigurationFigure 5.7: The Add Plug to Group Menu Text Interface 5.6.2. Adding Plug Groups Text Interface Web Browser Interface5-34 5.6.3. Modifying Plug Groups5.6.4. Deleting Plug Groups Note: Deleted accounts cannot be automatically restoredFigure 5.10: The Plug Parameters Menu Web Browser Interface Basic ConfigurationFigure 5.9: The Plug Parameters Menu Text Interface 5.7. Defining Plug Parameters 5-37 5.7.1.1. Example 1: Change Plug A3 to Priority BEFOREAFTER Priority5.7.1.2. Example 2 Change Plug A5 to Priority BEFOREAFTER PriorityFigure 5.14: Port Configuration Menu Web Browser Interface Basic ConfigurationFigure 5.13: Serial Port Configuration Menu Text Interface Communication Settings 5.8. Serial Port Configuration5.8.1. Console Port Configuration General Parameters AT&C1&D2S0=1&B1&H1&R2 Port Mode ParametersFigure 5.16: Remote/AUX Port Configuration Menu Web Browser Interface Basic ConfigurationFigure 5.15: Remote/AUX Port Configuration Menu Text Interface 5.8.2. Remote Port and AUX Port Configuration Bits/Parity: Default = 8-None Stop Bits: Default = Figure 5.17: Network Parameters Menu Text Interface Basic ConfigurationFigure 5.18: Network Configuration Menu Web Browser Interface 5.9. Network Configuration 5.9.1. Network Port Parameters 5.9.2. Network Parameters 5.9.3. IP Security 5.9.3.1. Adding IP Addresses to the Allow and Deny Lists Net/Mask Pairs EXCEPT5.9.5. Domain Name Server 5.9.4. Static Route5.9.6. SNMP Access Parameters Default = MD5 5-57 5.9.7. SNMP Trap Parameters5.9.8. LDAP Parameters Group Membership Value Type: Default = DN 5.9.8.1. Adding LDAP Groups 5.9.8.2 Viewing LDAP Groups 5.9.8.3. Modifying LDAP Groups Domain Realms 1 through 5 Default = Undefined Key Distribution Centers KDC1 through KDC5: Default = Undefined5.9.9. TACACS Parameters 5.9.10. RADIUS Parameters WTI-Super=2 WTI-Plug-Access=0101WTI-Group-Access=111000 Example WTI-Super=1, WTI-Plug-Access=1100, WTI-Group-Access=110005.9.11. Email Message Parameters 5.10. Save User Selected Parameters 5.10.1. Restore Configuration6. Reboot Options 6.1.1. Adding Ping-No-Answer Reboots 6.1. Ping-No-Answer RebootIn order for Email/Text Message Notification to function, you must first define Email/Text Message parameters as described in Section Text Interface 6.1.2. Viewing Ping-No-Answer Reboot ProfilesWeb Browser Interface 6.1.4. Deleting Ping-No-Answer Reboot Profiles 6.1.3. Modifying Ping-No-Answer Reboot Profiles6.2.1. Adding Scheduled Reboots 6.2. Scheduled RebootThe Add Scheduled Reboot menu allows you to define the following parameters for each new Scheduled Reboot Text Interface 6.2.2. Viewing Scheduled Reboot ActionsWeb Browser Interface 6.2.4. Deleting Scheduled Reboots 6.2.3. Modifying Scheduled Reboots7. Alarm Configuration 7.1. The Over Current Alarms All four types of Over Current alarms offer the following parameters 7.1.1. Over Current Alarms - Load Shedding and Auto Recovery In the Text Interface, Plug Access is configured by typing 4, pressing Enter and then selecting the desired Plugs from the resulting submenu Text Interface Web Browser Interface7.2. The Over Temperature Alarms Note: To cancel an alarm without correcting the condition that caused the alarm, simply toggle the Trigger Enable parameter Off and then back On again 7.2.1. Over Temperature Alarms - Load Shedding and Auto Recovery Default = undefined Text Interface Web Browser Interface7.3. The Circuit Breaker Open Alarm 7.4. The Lost Communication with AUX Units Alarm Default = On 7.5. The Lost Voltage Line In Alarm 7-16 7.6. The Ping-No-Answer Alarm Default = Alarm: Ping-No-Answer 7.7. The Invalid Access Lockout Alarm Default = On Text Interface: Type /SN and press Enter 8. The Status Screens8.1. The Network Status Screen Text Interface: Type /S and press Enter 8.2. The Plug Status ScreenText Interface: Type /SG and press Enter 8.3. The Plug Group Status ScreenText Interface Type /M and press Enter 8.4. The Current Metering Log Screen8.5. The Current History Screen To save Current History data, access command mode using an account that permits Administrator level commands, and then proceed as follows 8.6. The Power Metering Status Screen Text Interface 8.7. The Power History ScreenWeb Interface 9.1.1. The Plug Control Screen - Web Browser Interface 9. Operation9.1. Operation via the Web Browser Interface Operation 9.1.2. The Plug Group Control Screen - Web Browser InterfacePage 9.2.1. The Plug Status Screen - Text Interface 9.2. Operation via the Text Interface9.2.2. Switching and Reboot Commands - Text Interface ON AUX1 A1 Enter 1. Switch Plugs On2. Switch Plugs Off ON A1 Enter or /ON ROUTER EnterON ROUTER,Y or /BOOT B2,Y 3. Reboot PlugsBOOT B3 Enter or /BO ATMSWTCH Enter BOOT AUX2 A4 Enter or /BO AUX2 A4 EnterON AUX1 A1+AUX2 A3+AUX3 A4 Enter ON AUX1 A1,AUX2orA3,AUX3 A4 Enter 9.2.3. Applying Commands to Several Plugs - Text InterfaceOFF A1+A3+A4 Enter OFF A1,A3,A4 EnterON A1:A3,AUX1 A2:A4 Enter ON A1:A4 EnterON AUX2 A1:A4 Enter ON A1 A3+AUX1 A2 A4 Enter9.2.4. Connecting to Serial Ports - Text Interface 9.3. The Automated Mode 9.4. Manual Operation 9.5. Logging Out of Command ModeK <k> Enter 10. SSH Encryption11. Syslog Messages 11.1. ConfigurationFigure 11.1: The Test Menu Text Interface, Administrator Mode Only 11.2. Testing Syslog Configuration12. SNMP Traps 12.1. Configuration12.2. Testing the SNMP Trap Function 13.1. MPC SNMP Agent 13.2. SNMPv3 Authentication and Encryption13. Operation via SNMP userTable::userAccessLevel - Account access level. 0 - View Access 13.3. Configuration via SNMP13.3.4. Deleting Users 13.3.1. Viewing Users13.3.2. Adding Users 13.3.3. Modifying Users13.4.2. Controlling Plug Groups 13.4. Plug Control via SNMP13.4.1. Controlling Plugs 13.5.1. Plug Status environmentUnitTable::environmentUnitPowerA - Power drawn by Branch AenvironmentUnitTable::environmentUnitPowerB - Power drawn on Branch B 13.5. Viewing MPC Status via SNMP13.5.3. System Environment Status 13.6. Sending Traps via SNMP14-1 14. Setting Up SSL Encryption14.1. Creating a Self Signed Certificate 14.2. Creating a Signed Certificate Page 15.1. Sending Parameters to a File 15. Saving and Restoring Configuration Parameters15-2 15.2. Restoring Saved Parameters15.3. Restoring Previously Saved Parameters 16. Upgrading MPC Firmware b Start FTP/SFTP Servers & Default Keep IP parameters & SSH Keys: To6. Transfer the md5 format upgrade file to the MPC 17.1. Command Conventions 17. Command Reference GuideCommand Reference Guide 17.2. Command SummaryFormat: /S Enter 17.3. Command Set17.3.1. Display Commands Display Plug Status ScreenFormat: /L Enter H HelpFormat: /H Enter Log FunctionsFormat: /BOOT aux <n>,Y Enter or /BO aux <n> Enter Where 17.3.2. Control CommandsExit Command Mode BOOT Initiate Boot CycleON aux2 B4 Enter ON Switch Plugs ONFormat: /ON aux <n>,Y Enter ON A2+A3,Y EnterOFF aux2 B4 Enter or /OF aux2 B4 Enter OFF Switch Plugs OFFFormat: /OFF aux <n>,Y Enter or /OF <n>,Y Enter Where OFF A2+A3,Y Enter or /OF A2+A3,Y EnterConnect to Serial Port DPL Set All Plugs to Default StatesAvailability: Administrator Format: /U Enter Format: /DPL,Y EnterConfiguration Commands Availability: Administrator Format: /K k EnterUnlock Port Invalid Access Lockout Availability: Administrator Format: /UL EnterReboot Options Availability: AdministratorAvailability: Administrator Format: /G Enter Availability: Administrator Format: /N EnterAvailability: Administrator Format: /I Enter Alarm Configuration ParametersAvailability: Administrator Format: /AC Enter Reboot System DefaultTEST Test Network Parameters Upgrade FirmwareAvailability: Administrator Format: /UF Enter Availability: Administrator Format: /TEST EnterModels MPC-20V-1 & MPC-20V-2 Appendix A. SpecificationsPhysical/Environmental Models MPC-8H-1 & MPC-8H-2 Models MPC-16H-1 & MPC-16H-2B.1. Serial Console Port RS232 1. When connected2. When not connected Appendix B. Interface DescriptionsRequest to Send B.2. RJ-45 AUX Port InterfaceRJ-45 Figure B.2: MPC Series AUX Port InterfaceDB-9M DTE Appendix C. Connecting Devices to AUX & Remote PortsC.1. Connecting an Auxiliary MPC Unit to the MPC AUX Port RJ-45 DCEMPC Series C.2. Connecting an MPC-DISPLAY Unit to an MPC Master UnitRJ-45 Remote PortRJ-45 Cable C.3. Connecting Other RJ-45 DCE Devices to the AUX & Remote PortsAUX or Remote Serial PortAppendix D. Customer Service E.1. L Bracket Mounting Appendix E. Rack MountingMPC-20V Unit Equipment Rack“L” Bracket Retaining ScrewsApx-10 E.2. Mounting ButtonsApx-11 E.3. Hook Bracket Mounting MPC-20V Series OnlyMPC-20V Unit E.4. Zero-U Pocket Bracket Mounting MPC-20V Series OnlyMPC-20V Unit 1. Attaching the Zero-U Pocket Brackets to the MPCApx-13 Appendix F. Output Cable KeeperTrademarks and Copyrights Used in this Manual Trademark and Copyright InformationIndex-1 IndexIndex-2 Index-3 Index-4 Index-5 Index-6 Index-7 Index-8 Index-9