Western Telematic MPC-20VD20-2, MPC-20VD20-1 Sending Traps via SNMP, System Environment Status

Operation via SNMP

13.5.3. System Environment Status

The system environment status for the local MPC unit and all connected AUX units can be retrieved for the entire system.

•environmentBranchATotalCurrent – Total Branch A current for MPC system (LOCAL and AUX units.) Note that Total Current will be reported in tenths of an Amp (divide result by ten to determine value in Amps.)

•environmentBranchATotalPower – Total Branch A power for MPC system (LOCAL and AUX units)

•environmentBranchBTotalCurrent – Total Branch B current for MPC system (LOCAL and AUX units.) Note that Total Current will be reported in tenths of an Amp (divide result by ten to determine value in Amps.)

•environmentBranchBTotalPower – Total Branch B power for MPC system (LOCAL and AUX units)

•environmentSystemTotalCurrent - Total current drawn by Branch A plus Branch B. Note that Total Current will be reported in tenths of an Amp (divide result by ten to determine value in Amps.)

•environmentSystemTotalPower - Total power drawn by Branch A plus Branch B.

•environmentMonthlyPowerLog - The monthly power usage log.

13.6.Sending Traps via SNMP

Traps that report various unit conditions can be sent to an SNMP Management Station from the MPC. The following traps are currently supported.

•WarmStart Trap – Trap indicating a warm start

•ColdStart Trap – Trap indicating a cold start

•Alarm Trap – Trap indicating an alarm condition

•Test Trap – Test trap invoked by user via the Text Interface (CLI.)

•Alarm Trap – Trap indicating an alarm condition. A trap with a unique enterprise OID is defined for every possible alarm in the system, under which several specific trap-types are defined to indicate the setting or clearing of that particular alarm condition.

13-6