| Hardware Installation |
4.3.2. Default Flow Control Format (Sw3)
SetUp Switch three selects the default flow control (handshaking) format for the serial Modem Port. The Modem Port flow control format can also be selected via the Modem Parameters Menu. If the unit is reinitialized, the flow control format will return to the setting specified b y SetUp Switch three.
Default Flow Control Format | Sw3 |
None * | Down |
RTS/CTS (Hardware) | Up |
*= Factory Setting
4.3.3.Default Bits and Parity (Sw4)
SetUp Switch four selects the default bits and parity setting for both the internal modem and the serial Modem Port. The bits and parity can also be selected via the Modem Parameters Menu (/M). If the unit is reinitialized, bits and parity will return to the setting specified by SetUp Switch four.
Default Bits and Parity | Sw4 |
8 Bits, No Parity, 1 Stop Bit * | Down |
7 Bits, Even Parity, 1 Stop Bit | Up |
*= Factory Setting
4.3.4.Default Rings to Answer (Sw5)
SetUp Switch five selects the default “Rings to Answer” setting. The Rings to Answer setting can also be defined via the Modem Parameters menu (/M). If the
Default Rings to Answer | Sw5 |
One * | Down |
|
|
Eight | Up |
* = Factory Setting
