Western Telematic SRM-100 manual Zero Activity Counters, Save Parameters

SRM-100 - Secure Rack Modem, User's Guide The Password Directory

2.Password: The User Password that is currently defined for this name. Note that the password is case sensitive.

3.Dial Back Number: The Dial Back Number currently defined for this name. Note that if the Dial Back Number has not been defined, this field will read "undefined".

4.Activity: The number of times this password has been used since the last time the activity counter was reset. The procedure for resetting the activity counter is discussed in Section 6.5.

6.5. Zero Activity Counters

In order to track password activity, the Password Directory screen lists the number of access attempts for each user password/name. From time to time, you may wish to re-zero these counters to obtain a more accurate picture of password activity. To Zero the Activity Counters, proceed as follows:

1.Access the SRM-100 Command Mode as described in Section 5.1.

2.When the "SRM>" command prompt appears, type /U and press [Enter] . The Utilities Menu will appear as shown in Figure 7.2.

3.From the Utilities menu, type 1, then press [Enter] and follow the instructions in the submenu.

6.6. Save Parameters

After the Password Directory has been defined, it is recommended to save SRM configuration parameters and the Password Directory to an ASCII file as described in Section 8. This allows quick recovery in the event that the unit is reset to default parameters, or configuration is accidentally deleted or altered.

6-6