REMOVING THE INTERNAL DRAIN PUMP
WARNING
Electrical Shock Hazard Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
5.Loosen the clamps and pull the ends of the three water lines from the internal drain pump.
6.Disconnect the power cord plug from the internal drain pump.
7.Remove the two mounting screws from the internal drain pump.
Ends Of 3 Water Lines
1.Unplug ice maker or disconnect power.
2. Remove the ice from the storage bin. | Internal Drain Pump |
|
3.Disconnect the water and drain lines from the ice maker and remove the unit from its installation.
4. At the rear of the unit, remove the four |
|
|
|
screws from the unit compartment cover | Power Cord Plug |
|
|
and remove the cover. | Screws |
| |
| 8. Remove the internal drain pump from the | ||
| unit. | ||
Unit Compartment Cover
4 Screws
