Using Your Microwave Oven
ODD
DDD
DDD EaI.
Microwaveoven controls
There are three parts in the control section:
-Digital Display/Clock and Indicator Lights
-Command Pads
-Number Pads
Instructions for each control are covered on
the following pages. Read them carefully. When you first plug in the oven, a tone will
sound, the display will show “0” and the colon will flash. If after you set the Clock (page
Digital display/clock and indicator lights
When you are not using the microwave oven, this is an accurate digital clock.
When you are using the microwave oven, it display time settings, temperature settings, and Indicator Lights.
Command pads
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
-CLOCK SET tells the oven you are going to set the clock.
-START tells the oven to start.
(See page 10 for information on the tone you hear when touching any pad.)
Each Command Pad (except START, CANCEL,
and CLOCK SET) lights an Indicator Light when you touch the Command Pad.
While the oven is running, an Indicator Light (or lights) will be on to show what the oven is doing.
Number pads
Once you’ve touched a Command Pad to tell the oven what you want it to do, you’ll touch Number Pads to tell it
-a time,
-a Cook Power.
9
