4.ElecPricalrequirements
Observe all governing codes and ordi- nances. A 120 Volt, 60Hz, AC only, 15 or 20 amp fused electrical supply is required.
recommended.) It is recommended that a separate circuit serving only this appliance be provided.
5.GROUNDING INSTRUCTIONS
Electrical Shock Hazard
Improper use of the grounding plug can result in a risk of elec- trical shock. DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY CORD GROUNDING PRONG.
6.For your personal safety, this appliance must be grounded. In the event of an elec- trical short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electric current. This appliance is equipped with a polarized 3- prong grounding plug. It must be plugged into a correctly polarized mating
3-prong grounding type
Power supply |
|
cord | Grounding prong |
V’- | 7. To test the oven, plug it into | |
| ||
the proper electrical outlet. Put | ||
about one cup (250mL) of cold | ||
T3 | ||
water in a glass container in the |
oven.
Close the door. Make sure it latches. Follow the directions on page 12 to set the oven to COOK for 2 minutes. When the time is up, the water should be heated.
It is personal responsibility and obliga- tion of the customer to have a properly grounded and correctly polarized
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
It is not recommended to use an exte- nsion cord with your microwave oven, but if you find it necessary to do so tem- porarily (until a properly grounded and polarized
8.This microwave oven is designed for use in the household only and must not be used for commercial purposes.
Do not remove the door, control panel or cabinet at any time. The unit is equipped with high voltage and should not be serviced unless by an authorized Whirlpool”” service technician.
- SAVETHESEINSTRUCTIONS-
27