White Rodgers 1F92W-51 Installing Your Thermostat, New Installation, Select Thermostat Location

INSTALLING YOUR THERMOSTAT

NEW INSTALLATION

WE RECOMMEND THAT YOU PROGRAM THE THERMOSTAT WITH BATTERY INSTALLED BE- FORE ATTACHING ON SUBBASE. SEE OPERA- TION SECTION FOR PROGRAMMING INSTRUC- TIONS.

SELECT THERMOSTAT LOCATION

Proper location insures that the thermostat will provide a comfortable building temperature. Ob- serve the following general rules when selecting a location:

1.Locate thermostat about 5 ft. above the floor.

2.Install thermostat on a partitioning wall, not on an outside wall.

3.Never expose thermostat to direct light from lamps, sun, fireplaces or any temperature radiat- ing equipment.

4.Avoid locations close to windows, adjoining out- side walls, or doors that lead outside.

5.Avoid locations close to air registers or in the direct path of air from them.

6.Make sure there are no pipes or duct work in that part of the wall chosen for the thermostat loca- tion.

7.Never locate thermostat in a room that normally warmer or cooler than the rest of the building.

8.Avoid locations with poor air circulation, such as behind doors or in alcoves.

ROUTE WIRES TO LOCATION

NOTE

All wiring must conform with local and national electrical codes and ordinances.

7