MAINTENANCE
DUST BAG REPLACEMENT
1.Raise cover to expose filter cover.
2.Using lifting access hole, lift bag cover.
3.Carefully remove bag from hose.
4.Slide a new bag onto hose. Ensure bag is pushed on so that top of bag rest on top lip of filter cover.
DUST CONTROL SKIRTS
Replace skirts when worn, torn, or damaged in any way that allows dust to escape.
1.Remove skirt strips by pulling down.
2.Insert new skirt strips and snap them into place.
PAD INSTALLATION
Install pad using the pad centering tool (86064370 – PRV NO. 66829).
1.Lay the pad in the pan and position under the pad driver. The edges of the pan will align the pad and driver.
2.Screw the center lock in place through the hole in the pan. The center lock has a right hand thread.
The pad centering tool can be stored under the hood.
PAD
PAD CENTERING TOOL
SNAP OUT 
SNAP IN
CENTER LOCK
86306300 CHARIOT BURNISHER 11/09/07 |
