SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged!
10 - PN 1002940 AMBER FRONT REFLECTOR 9"
11 - PN 57123 RED REAR REFLECTOR 9"
12 - PN 1004114
13 - PN 1004991
DANGER
If shaft connection is visible, shield is missing. Replace shield before
operating equipment. | 1004114 |
1004991
WARNING
RAISED CUTTER CAN DROP AND CRUSH
Cutters must be equipped with transport lock.
stands.
All transport components must be functional, kept in good
Blocking up prevents cutter dropping from hydraulic leak down, hydraulic system failures, or mechanical component failures.
FAILURE TO FOLLOW INSTRUCTIONS CAN
RESULT IN SERIOUS INJURY OR DEATH.
TRANSPORT LOCK
AND CYLINDER REQUIREMENTS
SINGLE-ACTING FULL
EXTENSION
TRANSPORT
LOCK
14 - PN 19924
| WARNING |
| |
| Check for leaks with cardboard; never use hand. |
| Before loosening fittings: lower load, release pressure, and |
| be sure oil is cool. |
Consult physician immediately if skin penetration occurs. |
15a - PN 57840
540 RPM
15b - PN 57841
1000 RPM
17 - PN 15502
WARNING
ROTATING COMPONENTS
Do not operate without cover in place.
Look and listen for rotation. Do not open cover until all components have stopped.
CONTACT WITH ROTATING PARTS
CAN CAUSE SERIOUS INJURY.
16 - PN 33347
33347E
18 - PN 24611
SLOW MOVING VEHICLE EMBLEM
MAN0571 (Rev. 6/15//2007) | Safety 13 |
| |
|
|
