Woods Equipment DSO1260Q, DS1440Q, DS1260Q manual Install SMV Emblem Semi-Mounted, See Figure

Install SMV Emblem (Semi-Mounted)

See Figure 32.

1.Remove manual tube and hardware.

2.Align holes of manual tube and SMV mounting bracket (16) and reattach to deck using previous hardware.

3.Attach SMV socket (17) with two carriage bolts (28) and lock nuts (29).

4.Attach SMV emblem (19) to SMV bracket (18) using two round head cap screws (30) and hex nuts (31).

5.Insert SMV bracket (18) and emblem (19) into socket (17).

1.	Tailwheel	12.	1 x 4-1/2 Headless pin	24.	1/2 NC Lock nut
2.	Lower hitch pin	13.	1 x 5 Headless pin	25.	1/4 x 1-1/2 Cotter pin
3.	Drive	14.	1 x 3 Headless pin	26.	1/2 NC x 5 HHCSGR5
4.	Spring arm	15.	1-1/4 Stroke control kit	27.	1/2 NC Flange lock nut
5.	Spring	16.	SMV Mounting bracket	28.	5/16 NC x 3/4 Carriage bolt
6.	Transport lock-up	17.	SMV Socket	29.	5/16 NC Flange lock nut
7.	3-1/2 x 8 Hydraulic cylinder	18.	SMV Bracket	30.	1/4 NC x 1/2 Round head
8.	1/2 to 1/4 Reducer	19.	Slow moving vehicle emblem		screw
9.	1/4 x 1/4 90° Elbow w/ 1/16	20.	5/8 NC x 5 HHCS GR5	31.	1/4 NC Nut
	restricter	21.	5/8 NC Lock nut
10.	1/4 x 156" Hose	22.	7/16 x 2 Klik pin
11.	Ratchet adjustment link	23.	1/2 NC x 3 HHCS

Figure 32. DS1260 & DS1440 Semi-Mounted Cutter Assembly

46 Assembly MAN0571 (Rev. 6/15/2007)