Install SMV Emblem
1.Remove manual tube and hardware.
2.Align holes of manual tube and SMV mounting bracket (17) and reattach to deck using previous hardware.
3.Attach SMV socket (18) with two carriage bolts (29) and lock nuts (30).
4.Attach SMV emblem (20) to SMV bracket (19) using two round head cap screws (31) and hex nuts (32).
5.Insert SMV bracket (19) and emblem (20) into socket (18).
1. | Tailwheel arm | 18. | SMV Socket |
2. | Tire & hub | 19. | SMV Bracket |
3. | Attitude rod | 20. | SMV Emblem |
5. | Transport | 21. | 5/8 NC x 5 HHCS GR5 |
6. | 22. | 5/8 NC Lock nut | |
7. | 1/2 to 1/4 Reducer | 23. | 1/2 NC x 3 HHCS GR5 |
8. | Elbow with restricter | 24. | 1/2 NC Flanged lock nut |
9. | Hose | 25. | 1" Standard flat washer |
10. | Ratchet adjustment link | 26. | 1" NC Hex nut |
11. | Spring arm | 27. | 1/4 x |
12. | Spring | 28. | 1/2 NC x 5 HHCS GR5 |
13. | 1 x 3 Headless pin | 29. | 5/16 NC x 3/4 Carriage bolt |
14. | 1 x | 30. | 5/16 NC Flanged lock nut |
15. | 1 x 5 Headless pin | 31. | 1/4 NC x 1/2 Round head screw |
16. | Stroke control kit | 32. | 1/4 NC Nut |
17. | SMV Mounting bracket | 33. | 1/2 NF Lug nut |
Figure 28. DS1260 & DS1440 Pull-Type Cutter Assembly - Rear Half
MAN0571 (Rev. 6/15/2007) | Assembly 39 |
|
|
