Xantrex Technology manual Specifications, ACCB-L ACCB-L-L1

Introduction

Specifications

The following table contains the specifications for the ACCB-L, the ACCB-L-L1, and the ACCB-L-L2. The ACCB-L-L2 is not available pre-built from the factory, but is created by field-installing an ACCB-L2-PCK into a ACCB-L-L1 model.

Table 1-1Operational and Environmental Specifications for the ACCB-L, ACCB-L-L1, and ACCB-L-L2

	ACCB-L	ACCB-L-L1	ACCB-L-L2a
Dimensions	33" (H) x 11" (W) x 8 3/4" (D)	33" (H) x 11" (W) x 8 3/4" (D)	This configuration is created
	(84 cm x 28 cm x 23 cm)	(84 cm x 28 cm x 23 cm)	by field-installing an ACCB-
			L2-PCK into an ACCB-L-
			L1.
Weight	19 pounds (8.6 kg)	24 pounds (10.9 kg)	~2 pounds
Shipping Weight	23 pounds (10.4 kg)	27 pounds (12.2 kg)	~2 pounds
Operating Voltage	120/240 Vac,	120/240 Vac,	120/240 Vac,
	60 Hz split-phase	60 Hz split-phase	60 Hz split-phase
Factory-installed	• Din Rail	• Din Rail	• Din Rail
hardware	• Ground Bar	• Ground Bar	• Ground Bar
		• AC Bus Bar (Neutral)	• AC Bus Bar (Neutral)
		• AC Bus Bar (HOT L1)	• AC Bus Bar (HOT L1)
		• AC Input/Output Terminals	• AC Input/Output
		• AC Bypass Breaker	Terminals
			• AC Bypass Breaker
Factory-installed	None	#6 THHN AWG, rated to	#6 THHN AWG, rated to
wiring		105 °C, stranded copper	105 °C, stranded copper
		• One - Ground Wire	• One - Ground Wire
		• One - Neutral Wire	• One - Neutral Wire
		• One - HOT IN	• One - HOT IN
		• One - HOT OUT	• One - HOT OUT
Field-installed	N/A	ACCB-L2-PCK (needed to	• AC Bypass Breaker (Din
hardware		create ACCB-L-L2)	Rail-mountable) (w/HOT In
			and HOT Out wiring)
			• AC Bus Bar (HOT L2)
AC Bypass Switch
Bypass	None	60 Amp (SPST)	60 Amp (SPST)
Inverter	None	60 Amp (DPST)	60 Amp (DPST)
Input/Output
Rated Temperature	0 to 25 °C	0 to 25 °C	0 to 25 °C
	(32 to 77 °F)	(32 to 77 °F)	(32 to 77 °F)
Storage	-55 to +100 °C	-55 to +100 °C	-55 to +100 °C
Temperature	(-67 to 212 °F)	(-67 to 212 °F)	(-67 to 212 °F)
Enclosure	Indoor rated, White,	Indoor rated, White,	Indoor rated, White,
	Powdercoat Finish	Powdercoat Finish	Powdercoat Finish

1–4 973-0031-01-01 Rev A