Xantrex Technology ACCB-L-L1 manual Important Safety Instructions

Safety

Important Safety Instructions

WARNING

This chapter contains important safety and operating instructions for the Sine Wave Plus Long AC Conduit Box (ACCB-L and ACCB-L-L1) and the ACCB-L-L2 (ACCB-L2-PCK add-on package). Read and keep this Sine Wave Plus AC Conduit Box Long Owner’s Guide for future reference.

1.Before installing the Long AC Conduit Box, read all instructions and cautionary markings on the Long AC Conduit Box and all appropriate sections of this guide.

2.Do not expose the Long AC Conduit Box to rain, snow, or spray.

3.To reduce risk of fire hazard, do not cover or obstruct the ventilation openings.

4.Do not install the Long AC Conduit Box in a zero-clearance compartment. Overheating may result. Minimum clearance for ventilation around the unit must be twelve inches above and around the sides of the unit. See “Ventilation Requirements” on page 2–5 for additional information.

5.Do not store anything flammable near the unit. Relocate anything flammable to another location.

6.Xantrex offers CSA “approved” parts for installation into this product. Parts purchased elsewhere are subject to approval by the local electrical authority. See Figure 2-11 on page 2–16 for details.

7.The Long AC Conduit Box is designed to be permanently connected to your Sine Wave Plus inverter. Xantrex recommends that all wiring be done by a certified technician or electrician to ensure adherence to the local and national electrical codes applicable in your application.

8.To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and that wire is not undersized. Do not operate the Long AC Conduit Box, or inverter, with damaged or substandard wiring.

9.To reduce the risk of electrical shock, disconnect all power to the Long AC Conduit Box and the Sine Wave Plus Inverter/Charger before attempting any maintenance or cleaning or working on the Long AC Conduit Box.

10.The Long AC Conduit Box is provided with an equipment-grounding bar which must be connected to the inverter/system equipment ground.

973-0031-01-01 Rev A v