973-0031-01-01 Rev A iii
About This Guide

Purpose

The purpose of this Owner’s Guide is to provide explanations and procedures for
installing, operating, maintaining, and troubleshooting the Sine Wave Plus Long
AC Conduit Box.

Scope

The Guide provides safety guidelines, and procedures for installing and operating
the Sine Wave Plus Long AC Conduit Box.

Audience

The Guide is intended for a skilled electrician or technician who needs to install
and operate the Sine Wave Plus Long AC Conduit Box. Installers should be
certified and familiar with all local and national codes regarding electrical
installations of this nature.

Organization

This Guide is organized into three chapters.
Chapter 1, “Introduction” provides a basic introduction to the design and purpose
of the Sine Wave Plus Long AC Conduit Box (ACCB-L).
Chapter 2, “Installation” provides installation and wiring instructions for the Sine
Wave Plus Long AC Conduit Box.
Chapter 3, “Operation” describes the different modes and operation of the AC
Bypass Switch(es) on the ACCB-L-L1, or for the second AC Bypass Switch
(ACCB-L-L2) if installed.
Warranty and product information is provided at the end of the guide.

Product Naming Conventions

ACCB-L refers to the Long AC Conduit Box without AC Bypass Switch.
ACCB-L-L1 refers to the Long AC Conduit Box with AC Bypass Switch.
ACCB-L-L2 refers to the ACCB-L-L1 with the field-installed ACCB-L2-PCK
(AC Bypass Switch assembly, with wiring, and an AC Bus Bar for Hot L2
connections) and is usually configured for dual operation.
Long AC Conduit Box refers to all products and is used in situations where all
three products are treated the same.