Xantrex Technology PV-225208 Section Product Description Specifications, Equipment Symbol

SECTION 1

PRODUCT DESCRIPTION

SPECIFICATIONS

The PV-225208 has been designed for photovoltaic power systems, which operate within the following speci- fications.Application of the PV-225208 in a manner inconsistent with these specifications may cause damage to the PV-225208 and other system components, and is a violation of the terms of the warranty.

Nominal AC Line Voltage	208	VAC, +10% -12%
Maximum AC Line Current	695	ARMS (at low line voltage)
Nominal Line Frequency	60 Hz, +0.5 -0.7 Hz
Continuous AC Output Power	225.0 kW @ 208 VAC 3 Phase
PV Maximum Voltage	600	VDC
Peak Power Tracking Window	330*-600 VDC
PV Minimum Peak Power Tracking Voltage	330	VDC
PV Maximum Operating Current	710 ADC
Maximum PV Array Short Circuit Current	1100 ADC
PV Configuration	Monopolar negative grounded
Operating Temperature	**-20 to 50° C
Storage Temperature	-40 to 50° C
Maximum Ambient Temperature Rating	50° C
Relative Humidity	To 95%, Non-condensing
Elevation	Derated above 6,600 feet
Dimensions (in inches)	87 X 102 X 27
Weight	Approx. 1935 lbs.
Enclosure Type	NEMA 3R
UL Listing File	File-E199356

*Dependent on actualAC line voltage. Refer to Section 4 for detail on the minimum power tracking voltage. **If ambient temperature is between -20 to 0° C, the unit must be powered up in standby for at least one hour prior to going on-line.

EQUIPMENT SYMBOL

Chassis ground – Customer supplied system ground connection point. This symbol may be found near a stud within the main enclosure. It is provided as a location to bond the electrical system equipment ground.

DOCUMENT: 151811	PV-225208 Photovoltaic Inverter	1-4
	Operation and Maintenance Manual

Copyright 2003, Xantrex Technology Inc.