Xantrex Technology PV-225208 Section Appendix Faults Codes, READ/WRITE Parameter Menu

SECTION 7

APPENDIX

FAULTS CODES

Refer to section 5 for detailed fault code descriptions.

H - Fault(s) triggered by hardware

S - Fault(s) triggered by software

Error	Fault Source(s)	H/S	Error	Fault Source(s)	H/S
Code			Code
0000	No Faults		0062	Line Frequency Too High	(S)
002C	Matrix Over-Temperature	(S)	0063	Line Voltage Too Low	(S)
002E	State Machine Failure	(S)	0064	Line Voltage Too High	(S)
002F	Software Parameter Out of Date	(S)	012A	Interrupt Time-Out	(S)
0031	Ground Current Fault	(S)	0230	Door Interlock	(H)
0032	PV Over-Voltage	(S)	0430	PV Auxiliary Contact Block	(H)
0040	In Programming Mode	(S)	XX25	Line Matrix Gate Drive	(S)
0042	Bad Memory	(S)	YY27	Line Matrix Over-Current	(S)
0045	Line Matrix Control Failure to Turn On	(S)	0828	PV Over-Current	(S)
0046	Line Matrix Control Failure to Turn Off	(S)	8021	DC Bus Voltage Too High	(H)
0061	Line Frequency Too Low	(S)

READ/WRITE PARAMETER MENU

Read-Only Parameters

Parameters	ID	Type	Units	Data Limits	Default	Descriptions
						Current States:
						0-Initilizing
						1-Key-Disabled
Current Operating						2-Sleeping
	1	Read	N/A	N/A	N/A	3-Starting
State
						4-Power-Tracking
						5-Manual Current
						6-Matrix Test
						7-Faulted
						Goal States:
						0-Shut Down
System Goal State	2	Read	N/A	N/A	N/A	1-Power-Tracking
						2-Manual Current
						3-Matrix Test
DOCUMENT: 151811		PV-225208 Photovoltaic Inverter				7-1
		Operation and Maintenance Manual

Copyright 2003, Xantrex Technology Inc.