Xerox 4500 PS TR AS/400 Printing Using Host Print Transform and TCP/IP, Requirements

AS/400 Printing Using HPT and TCP/IP

Xerox 4500 PS TR

9.AS/400 Printing Using Host Print Transform and TCP/IP

This chapter provides:

AS/400 definitions for ASCII printing

Once these parameters have been configured, and the basic TCP/IP configuration of the Xerox 4500 PS TR has been completed, printing from AS/400 will be possible. This will use the AS/400 Host Print Transform to format and translate EBCDIC data, the command language used by the printer selected on the AS/400.

If 3812-1 emulation is required then the TCP/IP connection described in the “AS/400 SCS/DCA Printing using TCP/IP” section, should be considered.

If an SNA connection is required then the “AS/400 SCS Printing Using SNA” chapter should be considered.

If IPDS printing is required, chapter 13 “PSF/400 AFP Printing Using TCP/IP” should be considered.

Requirements:

-AS/400 version 3.1 with TCP/IP installed and a TCP/IP configured Xerox 4500 PS TR

The defined Output queue will be specified in print options when printing the document.

9.1 Create a remote output queue

The CRTOUTQ command is used to create a Remote output queue. This will enable the AS/400 to automatically output data that has been translated by Host Print Transform to the Xerox 4500 PS TR.

The following example shows the values required to create an output queue called PSX3OUTQ.

107