Xerox 4500 PS TR instruction manual OS/2 Setup, Net use lptx \\idaxxxxxx\PxPrinterx

NetBEUI/NetBIOS Printing

Xerox 4500 PS TR

The “Add Printer Wizard” will then open and you may select manufacturor and printer model via the wizard.

NOTE:

Windows ‘95 Xerox drivers may be obtained from the Xerox Web Site at: http:\\www.xerox.com or you may contact your point of purchase for details.

NOTE:

During the set up, you may need access to the original installation CDROM for Windows ‘95 and NT.

5.2 OS/2 Setup

To set up the OS/2 operating system follow these instructions:

1.Open an OS/2 window

2.Enter the following command at the prompt: net view \\ <PrintServer name>

NOTE:

The default PrintServer name is “idaxxxxxx” where the six “x’es” represent the last six digets of the MAC address

3.Press RETURN

4.Now enter this command:

net use lptx \\idaxxxxxx\Px_Printer_x

5.You have now captured your port for the PrintServer and you next step is then to install a printer.

[D:\] net view \\ida002efe Shared resources at \\ida002efe

Net name Type Used as Comment

-----------------------------------------------------------------------------------------------

P1_Printer_1	Print	idaPS printer
P2_Printer_2	Print	idaPS printer

The command completed successfully.

[D:\] net use lpt1 \\ida002efe\P1_Printer_1 The command completed successfully.

Example of setup for OS/2

97