Xerox 4500 PS TR PSF/MVS AFP Printing Using TCP/IP, 13.1 PSF/MVS direct attachment, MTU size

PSF/MVS AFP Printing Using TCP/IP

Xerox 4500 PS TR

13. PSF/MVS AFP Printing Using TCP/IP

This chapter provides:

JES installation statements

PSF Startup Procedures

Once these parameters have been configured, and the basic TCP/IP installation of the Xerox 4500 PS TR IPC(equipped with an IPDS top) has been completed, direct AFP / IPDS from PSF / MVS will be possible.

Requirements:

- use of PSF/MVS version 2.2.0 with PTF level UW21345

MTU size

∙The Maximum Transmission Unit (MTU) of the IP packet for the MVS system is recommended to be set up to 2000.

NOTE: The MTU size should not exceed the maximum size sent through the control unit. Failure may lead to transmission problems.

13.1 PSF/MVS direct attachment

Sample PSF/MVS JES2 initialisation statements

FSSDEF(FSS1)PROC=PSF4,HASPFSSM=HASPFSSM

PRT420,FSS=FSS1,MODE=FSS,PRMODE=(LINE,PAGE),

CLASS=A,UCS=0,SEP,NOSEPDS,CKPTPAGE=100,

DRAIN,WS=(R,Q/FCB)

Example of PSF/MVS JES2 printer definition

120